Vnish Firmware for S19 and T19

Version: 1.1.11

  • Power consumption is automatically regulated based on temperature

Install firmware

You need a Micro SD card with 8 GB or 16 GB. SD cards with more storage space can cause problems.

  1. Download the image for the SD card
  2. Flash the image onto the SD card with Etcher
  3. Unplug the miner
  4. Insert the SD card into control board
  5. Power the miner up and wait for boot
  6. Default password: admin
  7. Keep SD card installed

Uninstall firmware

Uninstall means go back to the original FW.

  1. Unplug the miner
  2. Remove the SD card
  3. Power the miner up

List your Facility

Please fill out the form below and we will come back to you asap!